In order to better improve the work quality and work efficiency, the stone block cutting machine must do two preparations before starting the application.
1. In general, before starting the Stone Block cutting machine, check whether the flange of the clamping saw blade and its fasteners are firm, and whether each travel switch can be controlled automatically, and whether the coolant is sufficient and normal. Turn the saw blade by hand. Whether it is flexible or not, and whether there are obstacles in the feeding direction, in addition, we should pay special attention that the blade cannot be in contact with the block material, and the feeding motor can only be started after the main motor is running normally.
2. When using the stone block cutting machine to start trial cutting blocks, the traversing speed and cutting depth should not be too large, generally 5-6 mm. After normal cutting, the hardness of the block material should be considered, and the cutting knife should be reasonably selected. Traverse speed and penetration depth.
The above matters that need to be paid attention to before starting the application of the stone saw machine are introduced here. I hope to bring you some help, thank you for reading
