The maintenance details of the granite quarry machine are as follows:
1. After the operation, use tap water to rinse the slag on the surface of the studio and workbench and wipe it dry.
2. Regularly clean the oil stains on the carriage, the guide rail and the guide drive screw, and add lubricating oil in time.
3. After all the work is over, move the blade forward about 10 cm to reset the rocker arm of the travel switch.
4. If the automatic rock sawing machine is not used for a certain period of time after use, the moving parts of the blade and the fixture and some rust-prone places in the machine should be coated with a layer of lithium-based butter.
