Infrared bridge stone cutting machine is a widely used equipment in the industry and is favored by customers. Mechanical operation is a very important matter, and the impact on production is huge. So what should be paid attention to in the operation of the infrared bridge stone cutting machine? We analyze the instructions for you.
What should be paid attention to in the infrared bridge stone cutting machine?
1. It is strictly forbidden to operate with gloves. If dust is caused during operation, wear a mask or face shield.
2. Do not attempt to saw small unclamped workpieces.
3. This stone cutting machine is only allowed to cut profiles.
4. Do not perform powerful sawing operations, and make the motor reach full speed before cutting.
5. No one is allowed to stand behind the saw.
6. Do not lean over or go around the saw, and do not release any hand or lift your arm from the saw or workpiece when the saw blade is not stopped.
7. Do not operate when the shield is not in place, and do not place your hands within 15 cm from the saw blade.
8. Before repairing or replacing accessories, cut off the power supply and wait for the saw blade to stop completely.
9. If any abnormal sound is found, the inspection should be stopped immediately.
