Stone edging machine is a kind of edging machine for processing and polishing the straight edge lines of various granite, marble and quartz stone. The rough grinding, fine grinding and polishing of stone lines are completed at one time, which greatly improves production efficiency and line quality and saves costs. The following small series talk about the safety operation rules of stone edging machine.
First of all, it is necessary to do a good job of inspection before starting to make sure that the equipment is in normal condition. The grinding wheel pressing nut shall not be loose; the grinding wheel shall not have cracks and gaps; the safety cover is fully assembled and reliable; the front and rear, upper and lower transmission handles are flexible in operation, and there is no noise during operation. Stone edger operators must wear gloves and masks or dust-proof appliances. The doors and windows of the work area should be closed to avoid the escape of silica dust. Ventilation and dust removal devices must be in good working order. Stone cutting machine Stone sawing machine Hand edge trimming machine Grinding and polishing machine Stone machinery
Secondly, when grinding the steel plate, the adjustment size of the grinding wheel should be strictly controlled, and the grinding amount should not be too large at one time, so as not to cause the steel plate to be worn out and the grinding wheel to break; Take out the steel plate; during the work, always pay attention to check the motor for heat and abnormal operation; stack the steel plate (especially the cold-rolled plate and the oil plate) in an orderly manner, not skew, not higher than 1.2 meters and collide with each other to avoid Slip and fall and hurt people; the feeding and transfer steel plates should be held firmly and straight, and should not be thrown around, so as not to hurt people. Stone cutting machine Stone sawing machine Hand edge trimming machine Grinding and polishing machine Stone machinery
If the ventilation and dust removal device fails during the operation of the stone edging machine, the work should be stopped immediately or measures should be taken. After the work is completed, close the switch and do the cleaning work.
