The working principle of the stone polishing machine is that it spreads the polishing agent on the surface of the stone through the rotating polishing disc. Then, through friction and frictional force, the polishing agent is evenly spread over the surface of the stone to remove the blemishes and scratches on the surface of the stone. Meanwhile, the polishing machine can also adjust the rotational speed of the polishing disc and the amount of the polishing agent used to achieve different polishing effects.
The operating steps of a stone polishing machine usually include the following steps:
Clean the stone surface: Firstly, it is necessary to clean the stone surface to ensure that there is no dust, stain or impurity on it.
Prepare the polishing agent: According to the type of stone and the desired polishing effect, select an appropriate polishing agent and prepare it as required by the instructions.
Adjust the polishing machine: Based on the hardness of the stone and the requirements of the polishing effect, adjust the rotational speed of the polishing machine and the pressure of the polishing disc.
Conduct polishing: Evenly spread the prepared polishing agent on the stone surface, then place the polishing disc of the polishing machine on the stone surface and conduct polishing at an appropriate speed and pressure. Usually, multiple polishing operations are needed. After each polishing, promptly clean the stone surface and the polishing disc.
Cleaning and maintenance: After the polishing is completed, promptly clean the stone surface and the polishing disc of the polishing machine to keep them clean and in good working condition.
When using the stone polishing machine, safety precautions should be taken. Avoid touching the rotating polishing disc and use appropriate protective equipment. Meanwhile, according to the specific type of stone and polishing requirements, select an appropriate polishing agent and model of the polishing machine to obtain the best polishing effect.
