The operating procedures of the stone cutting machine: 1. Fix the rock sample with a special fixture as required, so that it cannot be loosened. 2. Start the main machine of the automatic rock sawing machine and turn on the tap water. 3. Press the fast forward button to make the blade close to the rock sample. 4. Press the forward button to make the speed meter indicate around 200 (the cutting speed of the blade depends on the hardness of the rock sample). At this time, the stone saw is automatically cutting. 5. When the cutting is completed, the blade automatically retreats, or you can manually press the back button. 6. When the blade retreats and leaves the rock sample, turn off the host and tap water. The above is the information provided by the automatic rock sawing machine manufacturer, I hope to help you.
Classification of stone cutting machine accessories: single-arm diamond circular saw, the main structure of this type of saw machine is that the beam is installed on the column through the carriage, and the beam and the spindle box are integrated structures, and the carriage drives the beam up and down At the same time, the movement drives the saw blade to move up and down to achieve longitudinal feed, the carriage moves along the beam to achieve lateral feed, and the main motor drives the saw blade to cut stone. This type of circular saw has a compact structure and is easy to operate, but at the same time, it has poor rigidity and low precision. Diamond disc stone sawing machine accessories, the main structure of this type of stone cutting machine is composed of left and right columns, beams, pallets and other components. The beam moves left and right to achieve lateral feed, and the main motor drives the saw blade to cut the stone. This type of circular saw has good rigidity and high machining accuracy, but its structure is complex, bulky and expensive. Bridge-type diamond disc stone sawing machine, the main structure of this type of sawing machine is composed of a beam and a combined carriage system. The carriage moves up and down to realize longitudinal feed, and the carriage moves left and right along the beam to realize lateral feed. , The main motor drives the saw blade to cut the stone. This type of circular saw has a simple and compact structure, low cost, high production efficiency, and a wide range of applications. It is the most common stone machinery, so it has been widely used in the stone industry.
