Stone cutting machine is a widely used equipment in the industry, favored by customers. Mechanical use and safety is a very important matter, the impact on production is very huge. Today we explain to you the use of stone cutting machine and safety matters.
1. The operator must have the knowledge of the use of general machinery and electrical appliances, and remember to wear insulation gloves when operating.
2. When the machine head needs to be tilted for cutting the bevel or groove, the machine head should be raised to the top part along the up and down rotating fan surface first, and then loosen the bolts above the tilted head. In order to prevent the nose from suddenly tilting down during operation, hold the nose with your hand when loosening the bolt.
3. Before starting the stone cutting machine, we must check whether the bolts and nuts of each part are loose, check whether the power supply and wiring are leaking, check whether the direction of the saw blade is placed in the same direction as the arrow of the protective cover, and we can start the machine after checking.
4. Remember to check and maintain the machine regularly during use. The walking wheel shaft, main bearing parts and the bearing parts of the manual feed device under the workbench should be inspected regularly to clean up the dirt and add some butter. In the process of work, there is noise or abnormal vibration, to stop the machine in time to check, rule out the abnormal situation before starting to use.
