Operating rules of stone saw machine:
1. Check the power supply voltage and water supply system.
2. Put the specimen on the workbench and fix it with the fixture.
3. Close the boxes of the saw mill and turn on the water supply.
4. Power on Turn on the power switch and adjust the running speed of the tool according to the hardness of the specimen.
5. Turn on the switch and start working until the stone saw machine returns to the starting point after completing its journey.
6. Turn off the stone sawing machine, turn off the water supply system and take out the specimen.
7. In the normal cutting process, if the main engine is found to have abnormal ringing, the tool should be immediately withdrawn and stopped for inspection; Also do not press the fast forward button, otherwise it will damage the blade and equipment; During the cutting process, check whether the cold water is sufficient at any time to prevent the blade from wearing or sticking.
8. After use, the residual rock slag on the workbench should be cleaned in time, the water stains on the blade and the workbench should be wiped away, and the lubricating oil on the feed tool drag plate and guide rail should be added.
