Infrared bridge stone cutting machine is widely used in the industry, favored by customers. Mechanical operation is a very important matter, the impact on production is very huge. So what matters need to be paid attention to in the operation of infrared bridge stone cutting machine? We analyze the instructions for you.
What should be noted about infrared bridge stone cutter?
1. Do not wear gloves. Wear a face mask or mask if dust will be caused during operation.
2. Do not attempt to cut the small workpiece that is not clamped.
3. This stone cutting machine is only allowed to cut profiles.
4. Do not carry out strong cutting saw operation, before cutting to make the motor reach full speed.
5. No one is allowed to stand behind the saw.
6. Do not lean over or around the saw, and do not release any hand or lift arm from the saw or workpiece when the saw blade is not stopped.
7. Do not operate when the guard is not in place. Do not place your hand within 15 cm from the saw blade.
8. Cut off the power before repairing or replacing parts, and wait for the saw blade to stop completely.
9. If abnormal sound is found, the inspection should be stopped immediately.
